manualshive.com logo in svg

VideoRay Defender MSS, Руководство оператора


Поделиться
Скачать
background image

MSS Defender

 

Operator's Manual, 1.00.00

System Voltage Advisory

AC Input

Input voltage is universal at 100-240 VAC; 50, 60 Hz. The power requirement for the MSS operating at
full power settings is 3,000 Watts. A 2,000 Watt source (i.e. generator) can be used if the system will
not be used at full power settings.

ROV DC Power

Historically, the tether voltage to power the ROV has been increasing. Economy models (including the
Scout, Explorer and Voyager), Pro 3 variants and the Pro 4 Ultra use 48 V DC for vehicle power. The
Pro 4 uses 74 V DC. The MSS (Mission Specialist Series) uses 400 V DC with plans to use higher
voltages in the future. Systems with voltages higher than 48 V DC include a LIM (Line Insulation
Monitor) protection module in the ROV DC circuit.

 System components should not be connected to voltage sources higher than their rating.

VideoRay Negative, Neutral and PPT tethers are rated to 600 V DC and are safe to use on any system
through the MSS 400 V DC.

 The standard TDS and Extended TDS are only rated to 300 V DC and should not be

used with MSS systems or components.

The new version of the extended TDS is available that includes a 600 V rated slip ring.

If you have any questions about system voltage and compatibility, contact 

VideoRay Support

.

Содержание Defender MSS














































































































Отзывы:

Нет отзывов

Похожие инструкции для Defender MSS

Taylor-Dunn 2018 BIGFOOT G-1500 Operator'S Manual preview
2018 BIGFOOT G-1500
Бренд: Taylor-Dunn Страницы: 52
KOMPERDELL TRAVEL E-TROLLEY Manual & Warranty Certificate preview
TRAVEL E-TROLLEY
Бренд: KOMPERDELL Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды