Vicon SVFT-C22, Инструкция по установке и эксплуатации

Страница: 73 / 80

XX134-07-00 Rev 908 SurveyorVFT Camera Dome System 12BReference
•
65
Network Cable
Caution: Careful selection of proper cable is essential to obtain the best performance. Vicon assumes no responsibility for poor
performance when cables other than the recommended types, or equivalent, are used.
Materials
Use p
ductors to obtain a low DC resistance. The preferred insulation and cable jacket is Polyvinyl
chlori lectrical characteristics than Polyethylene and resists flames, sunlight and most solvents, but
is more vulnerable to moisture.
ab
The m hese category cables are best suited for Ethernet
etwork applications.
Choo
able type by referring to the characteristics listed below. The Table below should be used as a
guide an Belden are used. Materials and construction must follow the guidelines above.
ure copper stranded con
etter e de (PVC). It has b
C le Types
ost commonly used cable types are CAT5, CAT5e and CAT6. T
n
se a Belden c
line when cables other th
C ORY BANDWIDTH
(MHz)
MAXIMUM
DISTANCE
(ft/m)
NUMBER OF
TWISTED
PAIRS
Belden 1624P 24 Propylene
Low Smoke
PVC 5 100 246/75 4
ABLE TYPE WIRE SIZE
(AWG)
INSULATION
MATERIAL
JACKET
MATERIAL
CATEG
Fluorinated
Ethylene
Belden 1583A
24 Polyolefin PVC 5e 100 328/100 4
Propylene
PVC 5e 100 328/100
4
Fluorinated
Ethylene
Belden 1585A
24
Belden 7883A
24 Polyolefin PVC 6 250 328/100
4
Belden Inc. http://www.belden.com/ (800) 235-3361
ble Types
Table
Recommended Network Ca