Vicon SVFT-C22, Инструкция по установке и эксплуатации

Страница: 68 / 80

60
•
9BCompetitive Protocols XX134-07-00 Rev 908 SurveyorVFT Camera Dome System
Cohu
Function Keypress Function Keypress
Enter Menu
To launch Dome menu use Preset 64 + Store.
Use Focus Far button to select and save
options. Use Iris Close button to abort or exit
options. Move mouse cursor up and down on
Pan/Tilt pane to select and highlight Dome
menu options.
AUX 1 is P Store, AUX 2 is P
Store, and AUX3 is P Store.
Set Transmit Polarity
Not Supported
Select/Store
Focus Far button
Program Sectors
Select Preset 63 and press Store button. AUX 2
is P Store and AUX3 is P Store.
Use Focus Far button to save sector selection
and go to next.
Backup/Abort/Exit
Iris Close button
Reset Dome
Not Supported
Iris Open
Iris Open
Set AP limits
Not Supported
Iris Close Iris Close Set Pan limits Not Supported
Focus Near Focus Near Diagnostic Screen Not Supported
Focus Far Focus Far Debug Screen Not Supported
Zoom Out Zoom Out Preset Tours To save tours use Dome menu
Zoom In
Zoom In
Auto Tour
Not Supported. Cohu does not support
AutoTours.
Camera Off
Camera Power button
Night Mode- Manual
Not Supported
Camera On
Camera Power button
Alarms
If the user wants to use the alarms they must be
acknowledged from within the dome (auto
acknowledge).
Autopan
Not Supported
Alarm Acknowledge
Auto acknowledge is the only one supported
Autoiris
Not Supported
Flip (Turn 180 degrees)
N/A
Lens Speed
Lens Fast button. Sets dome to "Hi" lens speed.
Camera Control
Including Adjust
V-Phase
N/A
Auxs
Not Supported
Presets
To save presets use either WinMPC software or
Dome menu. In WinMPC, to save a preset
select Preset (1-62) and press Store button. To
call back a preset select Preset (1-62) and
press GoTo button. Note, preset PTZ position
cannot be saved to Preset 63 and Preset 64.