Vicon SVFT-C22 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 80

Vicon SVFT-C22 Скачать руководство пользователя страница 1

Vicon part number 8009-8134-07-00

Section 3 Rev 908

XX134-07-00

Camera Dome

Warning: To reduce a risk of fire or electric shock, do not expose
the indoor unit to rain or moisture.

Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your
requirements or that the operation will be entirely error free or perform precisely as described in the
documentation. This system has not been designed to be used in life-critical situations and must not be
used for this purpose.

Copyright © 2008 Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
SurveyorVFT, NOVA and Vicoax are trademarks and ViconNet and Kollector are registered trademarks of Vicon Industries Inc.
ExView is a trademark of Sony Corporation.

VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788

TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116

24-Hour Technical Support: 800-34-VICON (800-348-4266)

UK: 44/(0) 1489-566300 WEB: www.vicon-cctv.com

1
2
3
...
»

Содержание SVFT-C22

















































































Отзывы:

Нет отзывов