55
Setup
ENGLISH
RF channels may also be known as
UHF
channels.
To change the RF output channel:
1.
From the Installation Setup menu, highlight ‘RF Output’, and then press
OK
.
The RF Outlets screen displays.
2.
On the ‘RF Channel Number’ item, press
L
or
R
to select the channel you want.
To save your changes, highlight ‘Save New Settings’ then press
OK
, or to cancel, press
BACK
.
❖
Setting up your remote control for your TV
You can set up your remote control to operate the basic features of your TV. This enables you to
control your TV and your box with just one remote control.
Code search
To program your remote control to operate your television, you must first use the remote control
to find the four-digit code the corresponds to your television brand. During this code search you will
run through every available code in the remote control’s library.
To search for your television code:
1.
Make sure that you television is switched on.
2.
Press the
TV
button on your remote control and release it.
3.
Press and hold down
SETUP
, until the red LED under the TV button blinks twice.
4.
Use the
number
buttons to enter
9 9 1
. The red LED under the TV button blinks twice.
5.
Aim the remote control at your television and press
S
.
6.
Aim the remote control at your television, and press
ch +
repeatedly, until your television turns
off (each time you press
ch +
the remote control sends a POWER (TV off) signal using the
next TV code contained in the remote control’s library).
You may have to press
ch +
many times (up to 150 times). The code search can take up to 15
minutes. If you skip a code, you can search through the previous code(s) by pressing
ch -
.
Remember to keep pointing the remote control at your television during the code search.
7.
As soon as the television switches off, press
SETUP
to store this code. The red LED under the
TV button blinks twice.
