11
Installation
ENGLISH
1.
Use the supplied SCART lead to connect your box to your TV.
2.
Use a SCART lead (not supplied) to connect your box to your VCR.
3.
Connect the leads from your satellite dish to the satellite input connectors (marked
INPUT 1
and
INPUT 2
) on your box.
The RF connection is not required for digital satellite TV. However, you may wish to connect RF
leads as shown, to continue to view or record terrestrial TV from your TV antenna.
You must then connect the lead from your TV antenna to the antenna input connector (marked
AERIAL IN
) on your box.
Connection method 3: To TV only
If wish to connect your box to a TV only, connect up as described in 3A or 3B below.
(The diagram below shows methods 3A and 3B combined.)
3A: If your TV has a SCART connector
1.
Use the supplied SCART lead to connect your box to your TV.
2.
Connect the leads from your satellite dish to the satellite input connectors (marked
INPUT 1
and
INPUT 2
) on your box.
3.
To continue to view or record terrestrial TV from your TV antenna, connect the lead from your
TV antenna to the antenna input connector (marked
AERIAL IN
) on your box, and use the
supplied RF lead to connect from your box’s RF out connector (marked
RF OUT - 1
) to the
antenna input on your TV.
3B: If your TV does not have a SCART connector
1.
Use the supplied RF lead to connect from your box’s RF out connector (marked
RF OUT - 1
)
to your TV.
2.
Connect the leads from your satellite dish to the satellite input connectors (marked
INPUT 1
and
INPUT 2
) on your box.
3.
Connect the lead from your TV antenna to the antenna input connector (marked
AERIAL IN
)
on your box.
230V 50Hz
K
C
O
H
S
CI
R
T
C
E
L
E
F
O
K
SI
R
N
E
P
O
T
O
N
O
D
N
OI
T
U
A
C
Lead from your
TV antenna
Leads from your
satellite dish
Supplied SCART lead
Supplied RF lead
TV
ANTENNA
IN
IN
Supplied
Quad LNB
