Vess R2000 SERIES, Руководство по эксплуатации продукта

Страница: 98 / 705

S
ettIng
-
uP wIth the
clI
Setting up the Vess R2000 in the CLI includes these actions:
• “Making Subsystem Date and Time Settings (CLI)” on page 71
• “Virtual Management Port Settings (CLI)” on page 72
• “Making Virtual Management Port Settings – Automatically (CLI)” on page 72
• “Making Virtual Management Port Settings – Manually under IPv4 (CLI)” on page 73
• “Making Virtual Management Port Settings – Manually under IPv6 (CLI)” on page 74
• “Maintenance Mode Settings (CLU)”
• “Making Maintenance Mode Settings – Automatically (CLU)”
• “Making Maintenance Mode Settings – Manually under IPv4 (CLU)”
• “Making Maintenance Mode Settings – Manually under IPv6 (CLU)”
M
akiNg
s
ubsysteM
d
ate aNd
t
iMe
s
ettiNgs
(cli)
To set the subsystem date and time:
1. Type
date -a mod -d
and the date in yyyyy/mm/dd format then press Enter.
administrator@cli> date -a mod -d 2013/03/25
2. Type
date -a mod -t
and the time in hh:mm:ss format, then press Enter.
administrator@cli> date -a mod -t 14:50:05
You can combine date and time settings, such as:
administrator@cli> date -a mod -d 2013/03/25 -t 14:50:05
71
Product Manual Setup