Vess R2000 SERIES, Руководство по эксплуатации продукта

Страница: 266 / 705

239
Product Manual WebPAM PROe - System Configuration
V
iewiNg i
sCsi p
ort
i
NForMatioN
To view information about a port:
1. Click the
Device
tab.
2. Click the
IO Network Management
icon.
3. Click the
Port
tab.
4. Click the port you want, then click the
View
button.
Port information includes:
• Controller ID – ID of the RAID controller where the port is located
• Status – Enabled or disabled
• Jumbo Frames – Enabled or disabled*
• Link Status – Up or down, active or inactive
• MAC Address – MAC address of the target port
• Maximum Supported Speed – Maximum speed supported (1 Gb/s or 10 Gb/s)
• Current Speed
– Current or actual speed of the target port
• Relative Portals – The portals corresponding to this target port
Items marked with an asterisk (*) are adjustable under "Making iSCSI Port Settings"
M
akiNg i
sCsi p
ort
s
ettiNgs
To make iSCSI port settings:
1. Click the
Device
tab.
2. Click the
IO Network Management
icon.
3. Click the
Port
tab.
4. Click the port you want, then click the
Settings
button.
5. Make settings changes as required:
• Jumbo Frames – Check to enable jumbo frame support on this port. Uncheck to disable.
6. Click the
Submit
button.