Vess R2000 SERIES Скачать руководство пользователя страница 229

Страница: 229 / 705

202

Vess R2000 Series Product Manual

Promise Technologies

reatiNg

ogiCal

riVe

aNually

This feature creates a logical drive only. You can also use the Wizard to create a disk array with logical drives

and spare drives at the same time.

This action requires

Super User

Power User

privileges.

To create a logical drive manually:

1. Click the

Storage

tab.

2. Click the

Logical Drive

icon.

3. Click the

Create Logical Drive

button.

4. Click the option button of the disk array you want to use and click the

Next

button.

5. Optional. Enter an alias in the

Alias

field.

Maximum of 32 characters; letters, numbers, space between characters, and underline.

6. Choose a RAID level.

The choice of RAID levels depends the number of physical drives in the disk array.

RAID 30, 50 and 60 only. Specify the number of axles for your array.

8. In the

Capacity

field, accept the default maximum capacity or enter a lesser capacity and size in MB, GB

or TB.

Any remaining capacity is available for an additional logical drive.

For each of the following items, accept the default or change the settings as required:

• Choose a Stripe size.

64 KB, 128 KB, 256 KB, 512 KB, and 1 MB are available.

• Choose a Sector size.

512 B, 1 KB, 2 KB, and 4 KB are available.

• Choose a Read (cache) Policy.

Read Cache, Read Ahead, and No Cache are available.

• Choose a Write (cache) Policy.

Write Back and Write Through (Thru) are available.

• Check box of Perfect Rebuild Enable / Disable Perfect Rebuild

10. Click the

Add

button.

The new logical drive appears on the list at the right.

Содержание R2000 SERIES
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание R2000 SERIES

Отзывы:

Бренды по названию

Популярные бренды

Vess R2000 SERIES, Руководство по эксплуатации продукта

Результаты поиска

Содержание R2000 SERIES

Отзывы:

Бренды по названию

Популярные бренды