Vess R2000 SERIES Скачать руководство пользователя страница 115

Страница: 115 / 705

teP

3 – s

PAre

rive

reAtiOn

Creating a spare drive is optional but highly recommended.

1. Enter your information and choose your options.

• Check the

Revertible

box if you want this spare drive to be revertible.

• Choose the option for the type spare drive you want.

Global

– Replaces a failed drive in any disk ar ray.

Dedicated

– Replaces the failed drive only in the assigned disk array.

2. Click the enclosure graphic to view information about physical drives.

3. Click a physical drive to select it for your spare drive.

The physical drive’s ID number is added to the Selected list.

4. Click the

Next

button to continue.

teP

4 – s

uMMAry

The Summary screen lists the disk arrays, logical drives, and spare drives that you specified.

If you accept these parameters, click the

Submit

button.

If you do NOT accept these parameters, review and modify your selections in the previous steps.

Advanced configuration - create spare drives

Vess R2000 Series Product Manual

Promise Technologies

Содержание R2000 SERIES
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание R2000 SERIES

Отзывы:

Бренды по названию

Популярные бренды

Vess R2000 SERIES, Руководство по эксплуатации продукта

Результаты поиска

Содержание R2000 SERIES

Отзывы:

Бренды по названию

Популярные бренды