Vess R2000 SERIES, Руководство по эксплуатации продукта

Страница: 511 / 705

484
Vess R2000 Series Product Manual Promise Technologies
V
iewiNg i
sCsi s
essioN
i
NForMatioN
(Clu)
To view a list of iSCSI sessions:
1. From the Main Menu, highlight iSCSI Management and press Enter .
2. Highlight iSCSI Sessions and press Enter .
3. Highlight the session you want and press Enter .
iSCSI session information includes:
• Session ID – ID number of the session
• Status – Active or inactive
• Initiator Name – SCSI qualified name (iqn)
• Portal IP – IP address of the portal
• Device Type – Initiator or target
• Target Portal Group – ID number
• TSIH – Target session identifying handle
• Execution Throttle – Max number of
outstanding commands on any one port
• Max Rcv Data Seg Length – Receive data
segment length
• First Burst Length – In bytes
• Default Time to Wait – In seconds
• Immediate Data – Enabled or disabled
• Header Digest – Enabled or disabled
• CHAP Authentication Type – None, Local,
Peer
• Portal ID – ID number of the portal
• Target Alias
• Target Name – iSCSI qualified name (iqn)
• Initiator IP – IP address of the initiator
• Initiator Source Port – ID number
• ISID – Initiator session ID number
• Max Outstanding R2T – Number of PDUs
ready to transfer
• Max Burst Length – In bytes
• Default Time to Retain – In seconds
• Initial R2T – Enabled or disabled
• Data Digest – Enabled or disabled
• Data PDU in Order – Enabled or disabled
• Data Seq in Order – Enabled or disabled
• Device Access Control – Enabled or disabled