Vess R2000 SERIES Скачать руководство пользователя страница 560

Страница: 560 / 705

533

Product Manual

Maintenance

pdatiNg

with

the

Clu

Download the latest

firmware image file from PROMISE support:

http://www.promise.com/support/ and save it to your Host PC or TFTP server.

To update the firmware on the RAID subsystem and JBOD expansion units:

1. From the Main Menu, highlight

Additional Info and Management

, and press

Enter

2. Highlight

Flash through TFTP

and press

Enter

3. Highlight

TFTP Server

and type the IP address of your TFTP server in the field provided.

4. Highlight

Port Number

and press the backspace key to erase the current value, then type the new

value. 69 is the default.

A list of the current users appears.

5. Highlight

File Name

and type the file name of the firmware image file in the field provided.

6. Highlight

Flash Method

and press the spacebar to toggle between:

• Disruptive

– Updates the RAID controllers and I/O modules

simultaneously. I/O operations stop during the firmware update.

• Non Disruptive

– (NDIU) Updates the RAID controllers and I/O modules one at a time,

enabling I/O operations continue during the firmware update. Updates with this option

take a longer period of time to complete. All Vess R2600 models support this feature.

7. Highlight

Start

and press

Enter

• If you chose the Disruptive Flash Method, the RAID subsystem

and JBOD expansion units automatically restart.

• If you chose the Non-Disruptive Flash Method, the system automatically

flashes and restarts the RAID controllers one at a time.

Important

Verify that no background activities are running on the RAID subsystem.

Warning
Do NOT power off the RAID subsystem during the update!
Do NOT move to any other screen until the firmware update operation is

completed!

Содержание R2000 SERIES
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание R2000 SERIES

Отзывы:

Бренды по названию

Популярные бренды

Vess R2000 SERIES, Руководство по эксплуатации продукта

Результаты поиска

Содержание R2000 SERIES

Отзывы:

Бренды по названию

Популярные бренды