Vertiv VRC-S, Руководство пользователя

Страница: 32 / 66

Figure 4.7 Secure the Local Display and Fan Cables
Item Description
1 Ratcheted end of cable tie
2 Location of local display and fan cables
3 Toothed clip to secure the bundle to the lip of the door
4 Fan cable
5 Local display cable
6 Cable tie clipped to the door
4.9 Connect the Vertiv™ VRC to the Geist™ rPDU
The factory-installed Geist rPDU is network-enabled, permitting monitoring and managing the Vertiv VRC over a network.
Use the supplied cable to set up the connection. the cable has an RJ-45 connector on one end and a USB connector on the
other.
To connect the Vertiv VRC to the Geist rPDU:
1. Take the communication cable out of the packaging and straighten the coils, removing any kinks.
2. Plug the RJ-45 connector into either of the two ports on the rear of the Vertiv VRC.
3. Route the cable to the Geist rPDU and connect it as shown in Figure 4.8 on the facing page .
4 Installation
28
Vertiv™ VRC-S User Manual