Vertiv VRC-S, Руководство пользователя

Страница: 6 / 66

Provide at least the minimum space between the accessories /components and the housing. This spacing must be
maintained for safe operation of the equipment when installed in accordance with the National Electric Code, ANSI/NFPA
70. As appropriate, all wiring and equipment should be installed in accordance with NFPA 70, “National Electrical Code,”
and the applicable sections of ANSI C2, “National Electrical Safety Code."
Vertiv™ VRC Safety Guidelines
WARNING! Risk of handling heavy unit and component parts. Can cause injury and equipment
damage. Use OSHA-recommended safe lifting techniques and/or lifting equipment rated for the
weight of the unit. Unit weights are specified in Specifications on page 41 .
WARNING! Risk of improper moving. Can cause equipment damage, injury or death. Use only
lifting equipment that is rated for the unit weight by an OSHA-certified rating organization. The
center of gravity varies depending on the unit size.
CAUTION: Risk of contact with sharp edges, splinters and exposed fasteners. Can cause injury.
Only properly trained and qualified personnel wearing appropriate, OSHA-approved personal
protection equipment should attempt to move, lift, remove packaging from or prepare the unit
for installation.
NOTICE
Risk of damage from forklift. Can cause unit damage. Keep the forklift's tines level and at a height suitable to fit
below the skid and/or unit to prevent exterior and/or underside damage.
NOTICE
Risk of improper storage. Keep the unit upright, indoors and protected from dampness, freezing temperatures
and contact damage.
Vertiv™ Geist™ rPDU Safety Guidelines
• The rack PDU is designed for information technology equipment in a Restricted Access Location. Only service
personnel should install and access the PDU. The rack PDU is not intended for use with life support or other
designated critical devices. If uncertain about its intended application, consult your local dealer or Vertiv
representative.
• Follow nameplate ratings when connecting equipment to the branch circuit. Maximum load must not exceed
the rating shown on the rack PDU nameplate. Take into consideration the effect that overloading of the circuits
might have on overcurrent protection and supplied wiring.
• The rated line voltage must not exceed the specifications on the rPDU's accompanying documentation..
• Operate the rack PDU in an indoor environment only in the appropriate ambient temperature range:
• Install the rack PDU in a clean environment, free of conductive contaminants, moisture, flammable liquids,
gases and corrosive substances.
• The rack PDU must be installed in a restricted-access location. A restricted-access location is an area where
access is possible only through the use of a tool or lock and key or other means of security, and is controlled by
the authority responsible for the location.
1 Important Safety Instructions
2
Vertiv™ VRC-S User Manual