Vertiv VRC-S, Руководство пользователя

Страница: 33 / 66

Figure 4.8 Vertiv VRC Monitoring Connections
Item Description
1 RJ-45 port on the rear of the Vertiv VRC (either port may be used)
2 Monitoring cable connected to an RJ-45 port on the rear of the Vertiv VRC (either port may be used)
3 Monitoring cable connected to the Geist rPDU
4.10 Attach Ductwork and Ceiling Tile (Vertiv™ VRC Self-
Contained)
Depending on the site's cooling requirements, warm air from the Vertiv™ VRC-S may be exhausted into the room. There it
may be handled by room cooling units or absorbed by the ambient air.
The Vertiv VRC-S includes a flexible duct and two ceiling tiles, one to move warm air from the Vertiv VRC-C into the ceiling
or and adjacent area through the duct. The second tile is for make-up air to deliver enough fresh air to the room.
WARNING! The two air traces (warm air and make-up air) must be separated.
The factory-supplied ducting attaches to the transition piece on the rear of the Vertiv VRC with a large hose clamp (factory-
supplied) that tightens around the two pieces. The ceiling grille may be used where a conventional dropped ceiling with
frames is used. The flexible ducting connects to the ceiling tile with the second hose clamp supplied by the factory.
4 Installation
29
Vertiv™| VRC-S User Manual