Vertiv VRC-S, Руководство пользователя

Страница: 23 / 66

3.3 Uncrating the Components
Once the pallets have been moved as close as possible to the installation location, remove the Vertiv™ VRC-S components
from the shipping pallets. Remove the Vertiv™ VR rack from its pallet first, retrieve the documentation from inside the
cabinet, then uncrate the Vertiv VRC-S kit.
IMPORTANT! Uncrate the components according to the instructions in the documents that were
shipped inside the Vertiv VR rack.
3.4 What's in the Box
The Vertiv VRC-S self-contained is shipped on one pallet with the Vertiv™ VRC installed inside of the specially prepared
VR Rack. The Vertiv VRC-S split will be sent on two pallets (the VRC split indoor unit inside the VR Rack and the VRC split
outdoor unit are on separate pallets).
The Vertiv VR, a 19-in. EIA server rack, will have these components factory-installed:
• Thermal separation
• Rack closing kit
• Sensors for temperature and door contact
• Backup fan
• Geist™ rPDU (factory-programmed)
• Liebert® GXT5 (in some EMEA versions)
The VRC10XKIT will have these components:
• Vertiv™ VRC Cooling Unit
• Condensate Pump
• Condensate Pump Bracket
• Condensate Pump Outlet Fitting, L-Shaped
• Plastic Drain Tubes, 2: 1 m (3 ft.) and 7.6 m (25 ft.)
• Rack-Mount Hardware for Vertiv VRC-S Components
• Display monitor in magnetic mounting box
• Display Cables, 2: 50 cm (19.5 in.) and 10 m (32.8 ft.)
• FTDI Cable to connect the Vertiv VRC to the rPDU
• Ceiling Duct Kit
• Hose Clamp
• Ceiling Grille
• Transition Piece (for heat rejection to ducting)
• Filters, 2; Vertiv VRC and Ceiling Grille
• Manuals for the Vertiv VRC and the condensate pump and manual for Liebert GXT5 (for some EMEA versions)
• Screws: 20 M6x12; 10 M5x12; 10 M3x8
3 Equipment Inspection and Handling
19
Vertiv™| VRC-S User Manual