Vertiv EXM 0080kTK16FN01000, Руководство пользователя

Страница: 70 / 156

56 Chapter 4 Operator Control And Display Panel
Liebert EXM 80kVA ~ 200kVA UPS User Manual
bar at the top of the interface summarizes information about the UPS status. The Status Gauge on the
UNIT STATUS pane gives additional details about the UPS status
4.4.1 Viewing UPS Data With The Status Gauge
The Status Gauge offers a quick summary of the UPS’s status. The information shown depends on the
type of UPS and its configuration and upon the choices made in the gauge’s setup. The data can be
chosen by someone with Administrator or Service access.
The additional data will not replace the information shown in the center of the Status Gauge. Touching the
center of the Status Gauge multiple times on will cycle through the data.
Figure 4-22 Default Status Gauge view
To change the values shown on the Status Gauge:
1. Log in with either Administrator or Service access.
2. Touch the SETUP menu icon.
3. Touch the Context menu icon.
4. Touch Configure Status Gauge. This opens the DIAL CONTROL SETUP pane, which holds settings for
the readings in the center of the gauge and for the upper and lower metering.
To change the data shown in the center of the gauge:
a. Expand the Center Readings menu by touching the arrow beside it.
b. Put a check mark in the check box beside each value to be displayed (see Figures 4-23 and 4-24).
To change the data shown in the gauge’s upper or lower section:
a. Expand the Upper Meter or Lower Meter menu by touching the arrow beside it.
b. Use the drop-down menu to choose whether the Upper Meter or Lower Meter shows data for the
Battery or Load. (Either the upper or lower part of the Status Gauge may be used to show Load or Battery
readings.)
c. Use the sliders to change the Warning Threshold or Critical Threshold (see Figures 4-23 and 4-24).
5. Touch the Save button to keep the changes or touch Cancel to exit without saving the changes.
Note