22 Chapter 3 Installation
SmartCabinet Series Solution Product for IDC or Computer Rooms User Manual
Figure 3-12 Insulation material
3.3 Installing Air Conditioner of 600mm Wide Integrated Unit
The 600mm wide integrated unit does not need to install the air conditioner assembly as the air conditioner has been
installed in the cabinet before shipment, and the copper pipes and cables have also been installed. The customer
only needs to check the interfaces on site and it is necessary to use the refrigerant in the indoor unit or the outdoor
unit to discharge the air in the copper pipe to the atmosphere, then fastening connection and turn on the condensing
valve.
Opening the rear cover of the top frame body
The clamping mode of the rear cover of the top frame body is easy to remove.
1. First, open the outer cover in the rear part of the frame body, and the operating procedures are shown in Figure 3-
13, and you need to remove the two screws on the top of the cover and then push upward to remove the cover.
Figure 3-13 Top frame body-open the rear cover 1
2. Then open the internal cover, and the operating procedures are shown in Figure 3-14. You need to remove the two
screws on the top of the cover and then push upward to remove the cover.
Fixing
screw
Push
upward
