36
20306745
VWDV70 Series Gas Fireplace
SIGNATURE COMMAND SYSTEM OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
1.
STOP!
Read the safety information above.
2. This appliance is equipped with an ignition device which automatically lights the burner. Do not try
to light the burner by hand.
3. Wait
fi
ve (5) minutes to clear out any gas. Then smell for gas, including near the
fl
oor. If you smell
gas,
STOP!
Follow "B" in the safety information on
Page 31
. If you do not smell gas, go to next
step.
4. Press the master switch to the "ON" (-) position. Within eight (8) seconds it will beep once. This
indicates the system is ready.
5. Press "ON " button. Sparker will spark and pilot
fl
ame will light.
6. Once pilot
fl
ame is established, the main burner
fl
ame will light automatically.
7. If the pilot will not stay lit after several tries, turn the master switch to "OFF" and call your service
technician or gas supplier.
TO TURN OFF GAS TO APPLIANCE
1. Turn master switch to "OFF".
2. Turn off all electrical power to the appliance if service is to be performed.
Command Center
ON
Master
Switch
OFF
OFF
ON
