20306745
29
VWDV70 Series Gas Fireplace
FINAL INSTALLATION
GLASS FRAME REMOVAL
NOTE:
If the safety barrier is in place, you must
fi
rst remove
it before you remove the glass frame. To remove the bar-
rier, simply lift up and pull out until the tabs are clear of
their corresponding slots on the
fi
rebox. Then proceed to
remove the glass frame by:
1. Use glass frame latch tool packed with unit to unlatch
the three (3) frame latches.
2. Pull frame away from unit and lift up and away.
CAU-
TION:
Frame is heavy: lifting may require two (2) people.
BULB REPLACEMENT
CAUTION:
Main power supply must be turned OFF before
replacing bulbs.
1. Remove front light socket cover.
2. Use a Phillips screwdriver to remove socket plate with
bulb to be replaced.
Figure 41
3. Replace socket and socket cover in reverse order.
PORCELAIN PANELS
NOTE:
You must purchase and install a porcelain panel
kit for this
fi
replace. Refer to Page 45 for kit part numbers.
Figure 42 -
Remove Safety Barrier and Glass Frame
Glass Frame
Latch Tool
CAUTION
The glass frame is heavy. Lifting may require
two (2) people.
Figure 43 -
Replace Light Bulbs
FP2937
Light Socket Cover
Socket Plate
Remove
Screws
DANGER
HOT GLASS
WILL
CAUSE BURNS
.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall
be installed for the protection of children and
other at risk individuals.
20306543
