VERITAS NetBackup 5240, Руководство по установке оборудования

Страница: 86 / 146

3
Secure the two captive screws on the edges of the front panel of the appliance.
4
Reconnect the data cables and the power cables according to the labels you
placed on them earlier.
Warning: If the data cables are connected to the wrong ports, data can be
corrupted or lost when the appliance is turned on.
Storage shelf rack requirements
For best ventilation, the rack cabinet:
■
Should be at least 100 cm (4 feet) from walls.
■
Should have at least 100 cm (4 feet) from other cabinets on the front and back
of the appliance and the storage shelves.
■
Data centers with two-foot spaces in the front and in the back of the appliances
are acceptable with proper cooling and ventilation
The following list describes the necessary personnel and equipment that customers
must supply at the installation site:
■
At least one person or a mechanical lift to move the appliance and the storage
shelves.
■
Ethernet and Fibre Channel (FC) cables to connect the appliance to your
corporate network.
■
A USB-keyboard and a monitor to connect to the appliance.
■
A 19-inch rack with dual Power Distribution Units (PDUs) with 120VAC or
220VAC power supplies.
Determining rack locations
The appliance and the storage shelves are both two rack units (2RU) high. To help
you identify RU spacing, many rack manufacturers typically use a system of lines
and sequential numbers starting at the bottom of the rack. The front and the rear
of the rack are marked the same to ensure that the rails are installed straight and
Adding one or more storage shelves to an operating 4TB appliance that does not have any storage shelves
Storage shelf rack requirements
86