manualshive.com logo in svg

Veris Industries E31A002, Руководство по установке, Страница: 25 / 26

Поделиться
Скачать
Veris Industries E31A002 Скачать руководство пользователя страница 25

Z206855-0B 

Page 25 of 26 

©2014 Veris Industries   USA 800.354.8556 or +1.503.598.4564  / [email protected] 04142 

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of  Veris Industries, L.L.C. in the USA and/or other countries.

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

Installation Guide

Power Monitoring

E31E Series

TM

The E31E can be configured to support the SNMP V2c protocol over ethernet. The SNMP community string and the IP address for 
the client receiving SNMP V2c event notifications can be set via the GUI. MIB files are available for download at http://www.veris.
com/SNMP.aspx to enable accessing the E31E from an MIB browser. 

The E31E OID structure organizes the data under two “panels” representing the two breaker panels that can be monitored by a 
fully populated E31E. Panel 1 corresponds to the CT strips connected to the “Panel 1A” and “Panel 1B” connectors and to the data 
set under Modbus address 1 or BACnet device identified as Node_1 in the GUI. Panel 2 corresponds to the CT strips connected to 
the “Panel 2A” and “Panel 2B” connectors and to the data set under Modbus address 2 or BACnet device identified as Node_2 in 
the GUI.

For each panel, data is arranged under six tree branches.  

• 

The Configuration branch contains all writable configuration parameters.  

• 

The Alarms branch contains all the alarm notification traps, the global alarm status registers and counters and tables 

of the alarm status indicators.

• 

The Voltage Inputs branch contains all data measurements pertaining to the voltage inputs.

• 

The Auxiliary Inputs branch contains all data measurements pertaining to the aux inputs other than voltage-related.

• 

The Branch Inputs branch contains all data measurements to the branch inputs in table format.

• 

The Flex Circuits branch contains all data measurements to the logical meter summaries in table format.

General SNMP 
Programming 
Information

Shop for Power Metering products online at:

1.888.610.7664

www.

PowerMeterStore

.com

Содержание E31A002



























Отзывы:

Нет отзывов