Veris Industries E31A002 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 26

Veris Industries E31A002 Скачать руководство пользователя страница 14

Z206855-0B

Page 14 of 26

©2014 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 04142

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

Installation Guide

Power Monitoring

E31E Series

TM

2. Temporarily change the IP address of the PC to a static value on the same subnet as the E31E. For example: If the E31E is set to

its factory default IP address of 192.168.1.24, set the PC to an unused static IP address on the 192.168.1.xxx subnet (where xxx

is any value between 1 and 255, except 24). Set the subnet mask to 255.255.255.0 (the screen captures in this example were

taken using Windows 7; other operating systems will look different).

a. Open the Control Panel:

b. In the Control Panel, select Network and Sharing Center. In the Sharing Center, select Change Adapter Settings in the list at
the upper left corner.

c. Select the connection for the setwork that the E31E is included on.

When the Local Area Connection Status windo appears, click on Properties

Gateway
Configuration (cont.)

Shop for Power Metering products online at:

1.888.610.7664

www.

PowerMeterStore

.com

«
...
12
13
14
15
16
...
»

Содержание E31A002



























Отзывы:

Нет отзывов