Verdemax 4343, Руководство по эксплуатации

Страница: 36 / 104

36
EN
5.4. Fitting the handle
Slide the handle onto the mounts in the housing
as far as the stop. Then fasten the handle on
both sides with one screw on each side.
5.5 Fitting the battery
Press the push-lock button of the battery as
shown and push the battery into the battery
mount provided. When the battery is positioned,
make sure that the push-lock button latches in
place! To remove the battery pack proceed in
reverse order.
Important!
Remarks: The vacuum lower should exclusively
use the battery and charger suggested above.
Other type battery and charger are never al-
lowed.
Before starting the equipment
Unpack the device and check it for complete
delivery contents and transport damage. Charg-
ing process
NOTE:
The batteries (optional; depending on the de-
livery scope) are not fully charged on delivery.
Before first use, fully charge the batteries. See
charger instruction manual.
Chargers are exclusively suitable to charge
these replaceable batteries: BC 20, BC 20.2
DUAL. Charging any other battery is not al-
lowed.
Do not use this product in any other way as
stated for normal use. Not observing general
regulations in force and instructions from this
manual does not make the manufacturer liable
for damages.
Charging process
CAUTION!: Use only original batteries in
the supplied battery charger.
NOTE: Put the battery into the slot of
charger. Make sure the battery and
charger is fully connected.
Insert the mains plug
Battery is charging.
Insert battery into the charger as far as stop.
The LED flashes green and the battery is
charged. When the battery is fully charged, the
LED lights green.
Original instructions