background image

PART 1 - General information

 

7

INTENDED USE

VENDLET Standard may be used for moving clients to a lateral, 

prone, or supine position, from one side of the bed to the oth-

er, or, to reposition them further up in bed. VENDLET Standard 

may also be used in connection with mobilization in and out of 

bed.

VENDLET Standard protects the caregiver from physical strain 

and heavy lifting in connection with the handling of immobile 

clients. Clients are turned/handled by pressing a hand control 

whereby the caregiver may support the client and ensure their 

correct and comfortable positioning. This provides room for 

increased awareness in the care, which boosts employee job 

satisfaction and client well-being.

To the client, the turning process becomes uniform and steady 

as the sheet supports the body over its full length. 

Target group

The target group is adult clients who are being cared for, 

dressed, washed etc. in bed. This will often be clients who are 

lifted in and out of bed or clients who are mobilized using a 

standing aid. Hence, the user will typically be clients with few 

physical and/or cognitive resources and palliative clients.

VENDLET Standard is also suitable for clients at risk of devel-

oping pressure ulcers. The uniform and steady transfer with 

the sheet minimizes friction and the associated shear that can 

damage the tissue and cause pressure ulcers. Furthermore, 

VENDLET Standard is often seen to have a positive effect on 

clients suffering from spatial awareness.

The VENDLET Standard is intended for adult clients weighing 

between 30 and 250 kg, with a height above 146 cm and a 

body mass index (BMI) above 17. 

There are no contraindications for the use of VENDLET Stand-

ard . However, prior to the first use of VENDLET Standard, it 

is important to assess whether VENDLET Standard is suitable 

for the client in question. It may be necessary to take special 

precautions, for example if a client is very restless in bed or has 

an untypical anatomy.

Independent living

VENDLET Standard is not designed to be operated by the cli-

ents themselves. However, if a risk assessment made by the 

responsible healthcare professional evaluate, that the client is 

able to take part in the moving and handling procedures, e.g. 

by operating the hand control, this can be a part of the rehabil-

itative effort.

The risk assessment should evaluate the clients physical, 

cognitive and palliative resources. The risk assessment must be 

available by the bed and must be updated on a regular basis. 

Vendlet ApS cannot be held responsible for the risk assessment 

or conclusions based on this.

Staff

Before using VENDLET Standard, it must be ensured that the 

caregivers/operators have read “Part 2 – User manual” and 

that the manual and quick guide are available by the bed.

Environment

VENDLET Standard can be used in all application environments 

(1-5), e.g. hospitals, nursing homes and domestic / private 

homes. 

PRODUCT DESCRIPTION

VENDLET Standard consist of two bars fitted with motors. The 

bar on the left side of the client has a blue color marking and 

the bar on the right side of the client has a red color marking. 

Each motorized bar has a groove which makes it possible to at-

tach the edge strip of the turning sheet to the bars. When the 

bars are running, the turning sheet will be dragged between 

the two bars, making it possible to move it from side to side.

A slide sheet is inserted under the turning sheet in order to 

reduce the friction of the turning sheet against the mattress.  

Four corner posts are fitted with a build-in actuator in order to 

raise and lower the bars with the press of a button.

VENDLET Standard can be adjusted in height, which makes it 

easy to adapt the system to the individual mattress and bed.

Furthermore, VENDLET Standard consist of a control unit and 

a hand control. The control unit is placed underneath the bed, 

normally on the base frame.

When the bars are raised VENDLET Standard works as side 

rails.

VENDLET Standard is telescopic in length and can be extended 

from 200 to 220 cm.

Содержание STANDARD









































Отзывы: