Vendlet STANDARD, Руководство пользователя

Страница: 9 / 40

PART 1 - General information
9
When the bar is up on the side where the turning sheet is be-
ing tightened, the client will be turned. If, on the other hand,
the bar is down on the side where the turning sheet is being
tightened, the client will be moved towards the edge of the
bed. These fundamental principles provide you with a num-
ber of ways to move and/or transfer clients. See the “How to
use VENDLET Standard” section in “Part 2 – User Manual” for
further details.
VENDLET Standard can be operated by only one caregiver.
Warnings
As it is recommended that the client does not
operate VENDLET Standard themselves, the hand
control must be placed on the outside of the bed
before leaving the client.
The client must not operate VENDLET Standard
on their own unless a qualified risk assessment
has been carried out. Vendlet ApS cannot be held
responsible for the risk assesment or conclusions
based on this.
Always, keep focus on the client when using
VENDLET Standard.
If the client has long and loose hanging hair, the
hair could in some situations be rolled onto the
bar. Therefore, long loose hair should be collect-
ed before moving and handling the client.
Be aware, that the client does not get too close
to the edge of the bed, as there is a risk of falling
out of the bed.
Do not use VENDLET Standard if the bars can not
be elevated properly.
Lowering the bed to a very low position may
leave the corner post close to the floor.
Consequently, you should not place your feet
under the corner posts.
The client must not hold on to the edge of the
turning sheet or bar during the transfer. If the
client is restless and needs something to hold on
to, we recommend they get a handle such as a
MANULET Mono Grip.
Stop button
The power button also functions as a stop
button.
If the hand control button controlling the tight-
ening of the sheet fails, the operation can be
stopped by pressing the button.
Accessories
Additional hand control:
An additional hand control can be connected if a hand control
is required on both sides of the bed.
Wider sheets :
Wider turning sheets and slide sheets are also available if
VENDLET Standard is to be used on wider beds, see page 18.
Battery backup:
Battery backup is available to operate VENDLET Standard
without a connection to the supply network. See page 37 for
technical information on the battery backup.