VEMCO - VR2C Manual
9
Jul 2018
56
5.2.2.6
Resetting the VR2C Battery Usage Indicator
The VR2C Battery Usage Indicator needs to be reset immediately
after a new, fresh battery is installed so the battery usage reported will
be accurate. This resetting can be performed using VUE (see
instructions below) or using an ASCII command (see section
3.2.5.2.8).
Only reset the Battery
Usage Indicator when a
fresh, new battery
was
just installed.
Establish communication
between the VR2C and
the VUE software
(section 3.1.2).
STEP 1
Click the Device Configuration icon (looks like a
wheel cog) on the VR2C Receiver T
ab’s ribbon.
This icon is not available if communication
between the VR2C and VUE is not established.
STEP 2
Select “Reset Battery
Usage Indicator” from
the list that appears
under the Device
Configuration icon.
STEP 3
Select “Reset”
to reset the
indicator value.
STEP 4
