VEMCO - VR2C Manual
9
Jul 2018
24
3.1.8
Enter Suspend Mode
Suspend mode is used to place the receiver in a low power state when it is being stored for an extended
period of time. When in Suspend mode, the receiver will not detect or record tag information. Place the
receiver in Suspend Mode by following the steps listed below.
When the receiver is about to be used again, communicate with a PC and start a
new study (section 3.1.6) to turn the acoustic receiver on. The VR2C cannot
detect acoustic tags when the acoustic receiver is in Suspend mode.
NEVER deploy a VR2C in Suspend mode.
The VR2C cannot detect acoustic tags
when in Suspend mode.
Review the information in the warning box and click “OK”
when finished.
The Receiver Status line will report “Suspended” in flashing
red text.
STEP 3
Click the “Enter Suspend Mode” icon on
the receiver ribbon.
STEP 1
Select “Yes” to turn off
the acoustic receiver
and enter Suspend
Mode.
STEP 2
Remove a VR2C
from Suspend mode
by starting a study.
VR2C receivers are shipped in
Suspend mode.
