VEMCO - VR2C Manual
9
Jul 2018
30
Enable the following in the terminal program of your choosing. Specifics are given for PuTTY and
HyperTerminal.
STEP 4
HyperTerminal
Local
Echo: Check “Echo typed
characters locally” to enable
Local Line Editing: not available so
no backspacing for corrections
Carriage Return / Line Feed: Check
the “Send line ends with line feeds”
box
PuTTY
Local Echo: Select the “Force on” radio button
in the Local echo section
Local Line Editing: Select the “Force on” radio
button under “Local line editing” to enable
backspacing for corrections
Carriage Return / Line Feed: Automatically line
feeds when Enter key is pressed.
Verify that status updates are being received based on
your RTM configurations. The default is to receive
status updates every 60 seconds.
This example
communication window includes the INFO command
and response as well as a status update from a
VR2C receiver.
STEP 5
A new command line will
time-out after 30 seconds
and any commands
entered will not receive a response. Always enter ASCII commands on a
new
command line
(press “Enter” just before entering a command).
