VEMCO - VR2C Manual
9
Jul 2018
35
Local Format:
Command:
*450088.0#25,TIME=2010-10-18 17:32:13 -0400\r
Response:
*450088.0#25[0009],OK,#9A\r\n
3.2.5.2.6
ERASE
The ERASE command erases the VR2C’s detection and raw log.
The VR2C must not be in RECORD mode when issuing the ERASE command.
Note: Care must be taken to ensure that all desired data has been offloaded from the VR2C (both the
detection log and raw log) before the ERASE command is issued. If .vrl files are desired, use the VUE
software to offload the VR2C logs (see section 3.1.7) prior to issuing the ERASE command.
Command:
*450088.0#25,ERASE\r
Response:
*450088.0#25[0009],OK,#9A\r\n
3.2.5.2.7 STORAGE
The STORAGE command places the VR2C into the low power SUSPEND mode. This command is
intended to be used prior to storing the VR2C for an extended time in order to help conserve the internal
battery power.
The VR2C must not be in RECORD mode when issuing the STORAGE command.
Command:
*450088.0#25,STORAGE\r
Response:
*450088.0#25[0009],OK,#9A\r\n
3.2.5.2.8 RESETBATTERY
The RESETBATTERY command should
only
be issued immediately after replacing the VR2C internal
battery with a fresh battery. This command resets the VR2C battery usage indicator back to 0% used.
Command:
*450088.0#25,RESETBATTERY\r
Response:
*450088.0#25[0009],OK,#9A\r\n