VEMCO – VR100 Receiver Operating Manual – Page 46
The event log memory is erased by first pressing the right selection button. A confirmation window
appears before the log is erased so the log can’t be accidentally erased. Erasing the event log will only
erase the events that have occurred to the VR100 receiver and not the channel settings or the sensor tag
information.
The memory can be erased from either the Event Log screen or from within the PC software, but the
memory should only be erased after the log has been copied to a computer (see the software manual for
details).
IMPORTANT
When the VR100 memory
is full, it must be erased
before more data can be
stored. Use the VR100HS
software to copy data to a
computer
before erasing
the VR100’s memory.
Event Log
Event Count: 42500
Use: 50 % ▊▊▊
Erase
09:01:07 ▬
GPS Status: 1 a
Monitor
Config
Press right selection
button to erase memory
Amount of
memory used
