VEMCO – VR100 Receiver Operating Manual – Page 42
4.3.3 Code Maps (3)
4.3.3.1 Understanding Code Maps
There are three default code maps used with VEMCO coded tags, MAP-113 for 69 kHz, MAP-413 for 180
kHz and MAP-311 for 81 kHz. These maps are installed by default. Several legacy maps can be installed
on the receiver using the VR100HS PC Software, but should only be used if directed by Vemco Customer
Support. The current default map definitions are listed in Table 4.3-3.
TABLE 4.3-3:
Current VEMCO Code Maps
Map Name
Code Spaces
2
Notes
MAP-113
A69-1105, A69-1303,
A69-1601, A69-1602,
A69-9001/9002,
A69-9004, A69-9006
Default Map for 69 kHz Coded Tags
MAP-311
A81-1008, A81-1105,
A81-1206, A81-1303
Default Map for 81 kHz Coded Tags
MAP-413
A180-1701, A180-1702
Default Map for 180 kHz Coded Tags
IMPORTANT:
VEMCO tag datasheets will contain a Code Space name which fully defines the tag
parameters necessary for the receiver. Ensure that you select a Code Map that contains all the code
spaces required for your tags.
4.3.3.2 Viewing Code Maps
To view the Code Spaces supported by each map, follow the steps listed below.
From the Main screen:
1.
Select Config (right selection button).
2.
Press “3” on the keypad.
3.
Select the desired code map number on the keypad.
4.
Select “View” by pressing the right selection button.
5.
Use the arrow buttons to cycle through the Code Spaces supported by the Code Map.
2
Code Space is new nomenclature for VEMCO tag types. It has been introduced to remove ambiguity over tag
parameters. VEMCO tag datasheets will contain a code space name.
