VEMCO – VR100 Receiver Operating Manual – Page 34
The Configure section has the menu structure displayed in the map below.
Each sub-menu option is associated with a number shown on the screen to the left of the selection, as
shown in the screen below. Selecting a sub-menu option can be performed by using the up and down
arrows on the front panel to move the cursor to the desired sub-menu and then pressing the right selection
button for the Select command. In the screen shown below, the System sub-menu is highlighted with a
flashing cursor. The down arrow in the screen (next to “Code Maps”) indicates that the list extends
downward. The remainder of the list can be accessed by using the down button. An up arrow will appear
in the top line if the list extends upward.
It’s also possible to select a sub-menu by
pressing the corresponding number on the
keypad. For example, the Backlight can be
accessed from the Configure main menu by
pressing the “2” button and then the “3” button
on the keypad. The menu numbers are
included in the previous map for easy
reference.
1 Channel
2
System
3 Code Maps
Select
2. CONT. ONE
1. CODED
3. CONT. TWO
2. SYSTEM
3. CODE MAPS
4. SENSOR TAGS
5. LOG
1. CHANNEL
CONFIG
2. CONTRAST
1. TIME
3. BACKLIGHT
5. UNITS
6. VERSION
7. RESET DEF
4. BATTERY
