Visitor Codes are temporary user codes that can be assigned to visitors or temporary workers to
ac�vate Output 1 (usually for door lock actua�on). They can be programmed for
One-Time
use or
with
Time-Limit
in a valid dura�on.
Loca�ons
User ID
Valid Dura�on
Entry of Code
Confirm
0 - 9 00 or 01 to 99 Visitor Code
NOTE:
●
Visitor codes can be 4-8 digits long in manual code entry mode; but must have the same length as
the master code if the keypad is in auto code entry mode.
●
10 unique User IDs
0-9
for 10 Visitor Codes.
●
Valid Dura�on:
--- One-Time Code – It has no �me limit but can only be used ONCE by visitor, a�er which it
is automa�cally cleared.
to
--- Time-Limit in Hour – Set the dura�on the visitor codes will be valid, from 1 to
99 hours.
●
All Visitor Codes will be deleted a�er power lost.
●
See “Programming Summary Chart” Sec�on C – 4 for more informa�on.
●
See informa�on on
Loca�on 82
concerning digit length of the code in Auto and Manual code
entry modes.
Programming Example :
1. Set keypad to programming mode with master code and
key. Taking the previous programmed
master code
3 2 8 9
as example here:
2. Program a Visitor Code 1 3 7 8 at ID “0” for One-Time use:
3. Program a Visitor Code 2 3 0 8 9 at ID “1” with Time-Limit of 5 hours:
4. Program a Visitor Code 8 3 5 8 at ID “2” with Time-Limit of 10 hours:
5. Exit programming mode by pressing the
Operation :
1. Ac�vate Output 1 with the One-Time Visitor Code:
----------- The code is cleared a�er use
2. Ac�vate Output 1 with the 5 hours Time-Limit Visitor Code:
------- Un-limited use within 5 hours
3. Ac�vate Output 1 with the 10 hours Time-Limit Visitor Code:
-------- Un-limited use within 10 hours
Programming The Visitor Codes (Loca�on 47)
17
