Operation :
1. Operate Output 1 in momentary mode of 5 seconds using user code
8 3 2 1
that was
programmed
previously:
----------- Output relay 1 operates for 5 seconds
2. Operate Output 2 in Start / Stop mode using user code
5 4 3 2 1
that was programmed previously:
-------- Output relay 2 start / stop in toggle with the same user code
3. Operate Output 2 in Start / Stop mode with the 3-digit Accelerated code using user code
5 4 3 2 1
if it was programmed previously:
----------------- Output relay 2 starts with Accelerated Code
--------- Output relay 2 stops with Full User Code
NOTE:
●
The purpose of the accelerated Code --
Start / Stop mode with accelerated code can be
considered as two user codes with one for star�ng and the other for stopping the output. Owner
can give the accelerated code to the staff to start a system (for example, an alarm system). The
staff can only start the system but can not stop it. Only the owner can stop the system with the
full user code.
●
The Super User Code is always valid to Start / Stop the relay outputs.
Super User Code
------- Output 1 Ac�vates or De-ac�vates
Super User Code
------- Output 2 Ac�vates or De-ac�vates
Programming Examples:
1. Set keypad to programming mode with master code and
key. Taking the previous programmed
master code
3 2 8 9
as example here:
2. Set Output 1 in momentary mode of 5 seconds:
3. Set Output 2 in Start / Stop Mode; OR
4. Set Output 2 in Start / Stop Mode with 3-digit Accelerated Start Code:
5. Exit programming mode by pressing the
20
