Super User Code is a mul�-task user code for ac�va�ng the two outputs 1 & 2 and opera�ng the
special func�ons of Output 1.
Loca�ons
Super User Code
Confirm
4 - 8 Digits
NOTE:
●
The super user code can be 4-8 digits long in manual code entry mode; but must has the same
length as the master code if the keypad is in auto code entry mode.
●
Super user code and Egress Bu�on are excluded from any system opera�on inhibit and lock-up;
they are always valid for door open at any�me for safety.
●
See “Programming Summary Chart” Sec�on C – 2 for more informa�on
●
See informa�on on
Loca�on 82
concerning digit length in Auto and Manual code entry modes.
Programming Example :
1. Set keypad to programming mode with master code and
key. Taking the previous programmed
master code
3 2 8 9
as example here:
2. Program 2 5 8 0 as Super User Code:
3. Exit programming mode by pressing the
Operation :
1) Opera�ng Output 1 and 2
Super User Code is just like a normal user code. Simply key-in the code with a specific output
number of the desired output. Super User Code can also be used to reset an output opera�ng
with long �mer instantly at any�me required.
------- Output 1 Ac�vates or De-ac�vates
------- Output 2 Ac�vates or De-ac�vates
Programming The Super User Code (Loca�on 45)
14
