VeEX VePAL MX100e+, Руководство пользователя

Страница: 31 / 115

Go back to top Go back to ToC
RX Filter Tab:
Allows the user to filter incoming streams. When checked, the incoming traffic flows not matching these
criteria will not be considered for these results.
MAC Destination address
MAC Source address
VLAN ID
IP Destination address
IP Source address
Remote Loop Filter: When enabled, the remote loop filter will send the Rx filter parameters to the remote loopback
unit as part of the loop up command. This way, only traffic corresponding to the filters will be looped and other
network traffic will be ignored.
BERT Setup - RX Filter Selection BERT Setup - UDP/TCP
UDP/TCP:
Input Source Port and Destination Port.
Go back to top Go back to ToC
7.1.2 Traffic Settings
/ e_Manual D07-00-050P RevD00 Page 31 of 115