![background image](http://html1.mh-extra.com/html/vdo/ms-4300-owners-manual/ms-4300-owners-manual_owners-manual_3722953039.webp)
The “TRAFFIC” menu
You can find out about the current traffic situation using the “TRAFFIC” menu. You
also use this menu to configure the settings for dynamic route planning.
☞
Press the
TRAFFIC
button.
✔
The “TRAFFIC” menu is displayed.
The following information is available:
■
Events
❑
On route:
All traffic obstructions on the route are displayed.
❑
Nearby:
All traffic obstructions within 100km of the current position of your car,
transmitted by the RDS-TMC station, are displayed here.
❑
At destination:
All traffic obstructions within 100km of the selected destination,
transmitted by the RDS-TMC, station are displayed here.
■
Plan detour
Using this menu item you can plan a detour at any time if you have been notified of a
road obstruction on the planned route.
✎
This function is only available if dynamic route planning is active (see below).
■
Dynam. route
This submenu allows you to make the following settings for dynamic route planning:
❑
OFF
: No dynamic route planning.
❑
Manual
: As soon as road obstructions are detected on the planned route the naviga-
tion system notifies you and you have the opportunity to start planning a detour.
❑
Auto
: The navigation system plans the route automatically, taking into account the
current traffic situation and, if possible, by-passes the relevant road obstructions.
■
TMC station
Display of the list of available TMC stations.
☞
Select the station from the list which you want to receive TMC information from.
✎
If the selected TMC station can no longer be received, the unit switches to “Auto”
and searches for the TMC station with the strongest signal.
☞
Select “Auto” for the station with the best reception to be automatically selected
for evaluation of the TMC data.
✎
Please note that the selected RDS-TMC station may not provide any traffic informa-
tion relating to your destination if the destination is located outside the station
range.
✎
Your system must contain activated C-IQ products which support the Traffic info
(TMC) function.
Navigation
38