■
Legal limit
Activating/ deactivating the warning for the legal speed limit on the current road sec-
tion.
Settings:
❑
ON
: If the legal speed limit is exceeded the speed limit is displayed on the guidance
screen in the form of a symbol with a thin border. As soon as the speed limit is ex-
ceeded significantly (approx. 10 km/ h) the symbol appears with the border filled in.
There is also an audible warning.
❑
OFF
: The legal speed limit is not displayed.
✎
Availability of the legal speed limit can vary depending on the map CD used and on
the country/ region.
A
WARNING: No responsibility is accepted for the correctness of the speed limit informa-
tion provided by the navigation system; it may not always reflect the currently valid regula-
tions. Always observe the applicable legal speed limits and traffic regulations. The vehicle
speedometer must always be given priority for display of the vehicle speed.
■
Info points
Activating/ deactivating the display of important facilities along the route.
Settings:
❑
ON
: When you are approaching a C-IQ Info point (fixed speed camera, red light
camera) information will be displayed and the
S
symbol will be shown in the dis-
play.
❑
OFF
: No Info point display.
✎
Activation of the C-IQ speed camera information is a prerequisite for this function.
✎
The map CD must be inserted during guidance in order to be able to use this func-
tion.
A
The road traffic regulations are to be complied with. The driver has the sole responsi-
bility for his/ her driving style. No liability is accepted for the completeness and accuracy of
the info points.
■
Tourist attr.
Activating/ deactivating the display of tourist attractions along the route.
Settings:
❑
ON
: When you are approaching a tourist attraction stored in the C-IQ database, in-
formation will be displayed and the
I
symbol will be shown in the display.
❑
OFF
: No tourist attraction display.
✎
Activation of the C-IQ Travel info products is a prerequisite for this function.
✎
The map CD must be inserted during guidance in order to be able to use this func-
tion.
Setup
47