VDH Products PROBA, Инструкция по установке и эксплуатации

Страница: 15 / 78

VDH Products BV Document 063319 - version 3.12 Page: 15 of 78
2.1.4 Stopping a ripening program
Make sure that the key switch is in the PE position.
When a ripening program is running a flashing LED in the DAY row shows
which day is currently active.
The LED above the
PROG key lights.
Press the PROG key.
The upper display shows the present program number.
The lower display flashes the text 'OFF".
Press the SET key. The control is stopped, the ripening room will no longer
regulate.
Another option is to step from a ripening program into the STANDBY mode.
Press STANDBY while a program is running.
The upper display will indicate the present program number.
The lower display reads 'Stb'.
Press the SET key. The program now changes to the STANDBY mode. The
STANDBY LED above this key lights.
The ripening program will regulate for an unlimited time at the STANDBY
temperature setpoint. If selected, the ventilation times will be taken into
account. The
PROG LED does not light anymore.
By pressing the STANDBY key once more, the STANDBY mode can be
stopped.
The upper display shows the text 'Stb'.
The lower display shows the text 'Off'.
Press the SET key and the STANDBY mode is switched off. The
temperature regulation stops, the ripening room will not be kept at a constant
temperature. Also the
STANDBY LED does not light anymore.