VDH Products PROBA, Инструкция по установке и эксплуатации

Страница: 10 / 78

VDH Products BV Document 063319 - version 3.12 Page: 10 of 78
If the ripening room is not ventilating at the moment, the upper display
indicates the time in hours till the next ventilation.
If there is no more ventilation, the lower display shows four horizontal bars.
Press the SET key and then the HUM/GAS key. The LED above the key
starts flashing to indicate this function is active.
If the ripening room is gassed and a gas sensor is present, the upper display
shows the remaining gassing time. This time is shown in minutes.
If no gas sensor is present and the ripening room is gassed on time basis,
the upper display shows the remaining gas supply time in minutes.
If the gas supply time has passed, the upper display shows the remaining
time of the gassing period in minutes.
If the ripening room is not gassing at the moment, but a gassing has to take
place, the display shows the time to the next gassing. This time is shown in
hours.
If no more gassing is required, the lower display will show four horizontal
bars.
Press the SET key and then the SENS/TIME key. The LED above the key
starts flashing to indicate this function is active.
The upper display shows the program clock, indicating how long the
program has run in the current day. In this example the time is 15 hours and
24 minutes.
The lower display shows the number of the present day.
Press the SET key and then the ZONE/HEAT key. The LED above the key
flashes indicating this function is active.
The upper display shows if the heating is switched on during the ripening
program when the temperature drops below the setpoint.
Please note:
The PROBA110 will switch to the normal working condition if within 30
seconds no key is pressed.