VDH Products PROBA, Инструкция по установке и эксплуатации

Страница: 14 / 78

VDH Products BV Document 063319 - version 3.12 Page: 14 of 78
steps to day 1 and the clock will count from 00.00 hours.
While programming the PROBA110 will use the last settings of that program
as default.
If a ripening program is adjusted during programming or during the ripening
process, these changed values are default settings for the next time the
program is used.
There is an option by adjustment of the internal parameters to program
standard programs, these are then used as default for programming. These
programs can be adjusted, but the next time the program is used, the
original standard program is shown.
When certain parameters for ripening programs are always the same, these
parameters can be skipped automatically. This ensures programming is no
longer than needed. This can be done using the internal parameters.
Programming can be interrupted at any time by pressing the PROG key. The
PROG LED will stop flashing and programming will not have any effect.
If during programming no key has been pressed for more than 30 seconds,
programming will be stopped. And the programming sequence will need to
be recommenced.
Tables on the this and the next page show all programming parameters with
their range and step size.
Parameter Description Min. Max. Step
P nr program number 1 20 1
d nr length of program 1 9 1
G c1 gas concentration gassing 1 0 ppm 2500 ppm 5 ppm
G t1 gas time gassing 1 0 min 2500 min 1 min
G P1 length of gassing period 1 0 hrs 99 hrs 1 hrs
G d1 start delay gassing 1 0 hrs 99 hrs 1 hrs
G c2 gas concentration gassing 2 0 ppm 2500 ppm 5 ppm
G t2 gas time gassing 2 0 min 2500 min 1 min
G P2 length of gassing period 2 0 hrs 99 hrs 1 hrs
G d2 start delay gassing 2 0 hrs 99 hrs 1 hrs
A t1 length ventilation 1 0 min 240 min 1 min
A P1 interval ventilation 1 0 hrs 99 hrs 1 hrs
A d2 delay ventilation 2 0 hrs 240 hrs 1 hrs
A t2 length ventilation 2 0 min 240 min 1 min
A P2 interval ventilation 2 0 hrs 99 hrs 1 hrs
d 1 temperature setpoint day 1 -10.0°C +40.0°C 0.1°C
d 2 temperature setpoint day 2 -10.0°C +40.0°C 0.1°C
d 3 temperature setpoint day 3 -10.0°C +40.0°C 0.1°C
d 4 temperature setpoint day 4 -10.0°C +40.0°C 0.1°C
d 5 temperature setpoint day 5 -10.0°C +40.0°C 0.1°C
d 6 temperature setpoint day 6 -10.0°C +40.0°C 0.1°C
d 7 temperature setpoint day 7 -10.0°C +40.0°C 0.1°C
d 8 temperature setpoint day 8 -10.0°C +40.0°C 0.1°C
d 9 temperature setpoint day 9 -10.0°C +40.0°C 0.1°C
Stb temperature setpoint standby -10.0°C +40.0°C 0.1°C
rh setpoint relative humidity 1% 100% 1%
Pr setpoint fans forward 0 Pa 125 Pa 1 Pa
Pr r setpoint fans reverse 0 Pa 125 Pa 1 Pa
d0 t start delay day 0 0 hrs 99 hrs 1 hrs
do A temperature control day 0 off on -
d 0 temperature setpoint day 0 -10.0°C +40.0°C 0.1°C
Strt start confirmation program - - -