PJXP200 / PJGCVX200 / PJCV224
2.7 Maintenance, care, storage
Due to the weight of the machine, we recommend that the assembly is performed with the assistance of another person.
To ensure long-term satisfaction with our product, it is necessary to pay due attention to maintenance and care. Regular maintenance of
the machine will prevent its early wear and ensure proper functioning of all its parts.
Follow all instructions concerning maintenance and adjustment intervals of the machine. We recommend that you keep a record of
working hours of the machine and conditions under which it worked (for service needs). After-season maintenance should be entrusted to
one of our authorized service centres, and that could include regular maintenance as well if you are unsure of your technical skills.
Before each use, check the tightness of the bolts that secure the working implement and all screw connections of
protective elements, covers, engine and guiding handles.
Replace all lost bolted joints by original parts that were designed for the given point. By using non-original parts
of poor quality you run the risk of injury or damage to the machine!
Keep the clutch plate clean and dry. Any traces of oil reduce the efficiency of torque transmission.
A good tool for monitoring the operating motor hours is VARI PowerMeter.
2.7.1 Recommended tools and accessories
For assembly and maintenance of the machine we recommend the following accessories and toolsí
.
TOOLS
ACCESSORIES
Combination open and ring end spanner or socket spanner No. 10 - 1x Socket spanner - square 3/8“- 1x
Combination open and ring end spanner or socket spanner No. 13 - 1x Fuel canister VARI 5 litre (Order No. 3562)
Combination open and ring end spanner or socket spanner No. 16 - 2x Fuel stabilizer HONDA (Order No. 08CXZ-FSC-250)
Cross-recessed screw screwdriver - 1x
Hour meter VARI POWERMETER (Order No. 4227)
Spark plug spanner No. 21 or 11/16“
- 1x
Table 22: Recommended tools and accessories
2.7.2 Machine lubrication
Observe basic hygiene rules, regulations and legislative acts on environmental protection when working with
lubricants.
If you are not sufficiently skilled manually, entrust this work to professional service.
2.7.2.1 Engine oil change
The engine is filled with engine oil designed for running in the engine. Refer to the instructions for use of the engine for the oil change
procedure
Change the oil while it is warm, it pours out easier.
2.7.2.2 Lubrication points
Pay adequate attention to lubrication to ensure a trouble-free and easy movement of all mechanical parts. From a wide range of oils any
oil in spray or oil for bicycles is suitable. Out of plastic lubricants any lubricant intended for water pumps or spray vaseline are fully
sufficient. However, for its application it is usually necessary to dismantle the appropriate slide assembly.
IMPORTANT NOTICE: ensure that the oil does not reach the centrifugal clutch lining when preserving the engine
flange connecting surface; it could cause clutch slippage and damage to the clutch lining and engine crankshaft
seal due to resulting higher temperatures.
Details of lubrication points are on
Pict. 11
, marked .
Note: The table of the lubrication intervals is on enxt page.
35
Not included with the machine.
36
For engine KOHLER Command PRO CV224
37
The instructions for use of the engine always contain the original version of the instructions for use in the language of the manufacturer and its translation into the official language
of the user.
23
R
ev
is
io
n
1
0
/2
0
2
1
OIL
