WRM-10P AND WRM-40 USER’S MANUAL
REV 3
48
3.9.2. Reviewing or Printing a Restored Test Record
Once you have restored a test record to the working memory (see section 3.9.1), you can print
or review it at the time it was restored or at a later time. Follow the steps below to review or
print a test record after it has been restored to the working memory:
a.
Start from the “START-UP” menu:
Press the
[2]
key (
SETUP
).
b.
The following screen will be displayed:
Press the
[2]
key (
REVIEW RECORD
).
c.
The following screen will be displayed:
1.
SCROLL TEST RECORD
Press the
[1]
key (
SCROLL TEST RECORD
) to view the test record on the LCD
screen. Use the
[PAPER
∨
Contrast]
key to scroll to the next page. Press the
[STOP]
key when you are done viewing the test record, and you will be
returned to the “START-UP” menu.
2.
PRINT TEST RECORD
Press the
[2]
key (
PRINT TEST RECORD
) to print the restored record. The test
record will be printed on the built-in thermal printer, and you will be returned to
the “START-UP” menu.
REVIEW RECORD
1.
SCROLL TEST RECORD
2.
PRINT TEST RECORD
1.
ENTER XFMR ID
2.
REVIEW RECORD
3.
RESTORE RECORD
4.
NEXT PAGE
1.
TEST XFMR 11/02/09
2.
SETUP 12:33:01
3.
USER DIAG
Содержание WRM-10P
