WRM-10P AND WRM-40 USER’S MANUAL
REV 3
18
e.
The following screen will be displayed:
Type the circuit information using the alpha-numeric keypad and then press the
[ENTER]
key.
f.
The following screen will be displayed:
Type the manufacturer name using the alpha-numeric keypad and then press the
[ENTER]
key.
g.
The following screen will be displayed:
Type the model information using the alpha-numeric keypad and then press the
[ENTER]
key.
h.
The following screen will be displayed:
Type the serial number using the alpha-numeric keypad and then press the
[ENTER]
key.
i.
The following screen will be displayed:
Type the transformer’s KVA rating using the alpha-numeric keypad and then press the
[ENTER]
key.
KVA RATING:
UP/DOWN TO POSITION
“ENTER” TO ACCEPT
SERIAL NUMBER:
UP/DOWN TO POSITION
“ENTER” TO ACCEPT
MODEL:
UP/DOWN TO POSITION
“ENTER” TO ACCEPT
MANUFACTURER:
UP/DOWN TO POSITION
“ENTER” TO ACCEPT
CIRCUIT:
UP/DOWN TO POSITION
“ENTER” TO ACCEPT
Содержание WRM-10P
