Van Der Stahl FEP-N2 Series, Руководство по эксплуатации

Страница: 21 / 38

FEP-N2 Series Operating Instructions Ver. 7.01E
FEP-N2
Unplug the sealer
When printing is not clean enough, see “13-1 Adjust
print density” and adjust print density.
After use, be sure to turn the printer power switch to the
OFF position. Also turn off the sealer power switch.
Pull out the sealer plug from the outlet if not using the
machine for a long period of time.
After use, clean the parts including types, etc., to make
sure that no damage has occurred.
If a part appears damaged, replace the part.
When the printer is ready to print, place a bag to the
seal area and start sealing. The beautiful print can be
created while you seal.
Printing is made on the position where a rubber
compression pad or type contact plate (for FEP-OS-N2
and FEP-V-N2) is positioned.
6WDUWVHDOLQJ
&KHFNSULQWUHVXOWV
3RZHUVZLWFK2))
,QVSHFWLRQDIWHURSHUDWLRQ
Rubber compression pad
110V 220V
Light Dark
Power switch
Illustration of inside printing device FEP-N2