Van Der Stahl FEP-N2 Series, Руководство по эксплуатации

Страница: 10 / 38

FEP-N2 Series Operating Instructions Ver. 7.01E
Depending on the application and types of films, special print tape may be required.
Please contact
Van der Stahl Scientific for further discussion on your printing needs.
Store in the room temperature and normal humidity avoiding direct sunlight. (The condition of 5 ~ 35 ºC
and 40 ~ 85%RH is preferable.)
Do not subject the print tape to unnecessary shock or impact. It may negatively affect the printing result.
If the print tape is not designated by Van der Stahl Scientific is used, there may be a negative impact on
the printer quality and/or the printing result.
Perform the printing test prior to the actual production. The printing is different depending on the film
material and/or the surface treatment, etc.
There are three types of print tapes available for your printing needs.
Please refer to the below chart and decide which one would be good for your application.
We recommend to perform print test prior to the actual production just to make sure the printing performance for
each type of print tape.
※
How to distinguish the three types of print tape
You can distinguish the types of print tape by the printing color
inside the paper core.
Please refer to the above chart for the color of each print tape.
The following print tapes are provided with the FEP-N2 series as
accessories:
HTD …… 2 rolls (one roll of HTD is installed to the printer.)
HTP …… 1 roll
Parts no. Parts name 5HFRPPHQGHG¿OP Length of roll Paper core color
※
53501 Print Tape HTD PE, PP 60m Blue
534091 Print Tape HTP PET, Ny 60m Green
53492 Print Tape HTH Strong for heat and boiling 60m Red
$ERXWSULQWWDSH
'HFLGHWKHSULQWWDSHW\SHGHSHQGLQJRQ\RXUDSSOLFDWLRQDQGILOPPDWHULDO
7KHW\SHVRIJHQXLQHSULQWWDSHV
9DULHWLHVRISULQWWDSHV
3UHFDXWLRQVLQXVLQJWKHSULQWWDSH