Van Der Stahl FEP-N2 Series, Руководство по эксплуатации

Страница: 7 / 38

FEP-N2 Series Operating Instructions Ver. 7.01E
The hot stamp printer FEP-N2, FEP-OS-N2, and FEP-V-N2 can only be used by mounting to Van der Stahl
Scientific sealers listed in the below table. Please make sure that the printer can be installed to your sealer.
Sealers
Inside printing device Outside printing device
Code No Name Code No Name
Fi, FiK, FA, OPL-200 single-side heating types 05281F FEP-N2 Cannot be installed
Fi, FiK, FA-200 double-side heating types 05281F FEP-N2 Cannot be installed
Fi, FiK, FA, OPL-300 single-side heating types 05281F FEP-N2 05282F FEP-OS-N2
Fi, FiK, FA-300 double-side heating types 05281F FEP-N2 Cannot be installed
FR, FiK, FA, OPL-450 single-side heating types 05281F FEP-N2 05282F FEP-OS-N2
FR, FiK, FA-450 double-side heating types 05281F FEP-N2 Cannot be installed
Fi, FiK, FA, OPL-600 single-side heating types 05281F FEP-N2 05282F FEP-OS-N2
Fi, FiK, FA-600 double-side heating types 05281F FEP-N2 Cannot be installed
V-402, V-401, V-400, VG-602/402 series Cannot be installed 05293F FEP-V-N2
3URSHUSULQWHUIRU\RXUVHDOHU
$FFHVVRULHVIRU)(391RXWVLGHSULQWLQJGHYLFH
Print tape cover (OS)
……… 1 pc.
Type contact bracket (with screw)
……… 1 pc.
Adjustment axis bracket
……… 1 pc.
Attention
Attention
FEP-V-N2 is a manufacture option and it can be mounted only when purchasing a sealer. Please note
that installation of FEP-V-N2 after the delivery of the main unit requires installation adjustment work by
manufacturer or by the reseller.
If your sealer is
an old er model and not listed on the chart above, the printer might not be able to be
mounted on your sealer. Please con tact Van der Stahl Scientific for more detail s .