Van Der Stahl FEP-N2 Series, Руководство по эксплуатации

Страница: 26 / 38

FEP-N2 Series Operating Instructions Ver. 7.01E
FEP-N2
Install the print tape to the feed roller. Make a
loop with the tape as in the right illustration.
Matte surface must come outside of the loop.
Put the heater section unit through the print tape
loop. Fix the heater section unit with the
roulette knobs removed at
.
Turn the power switch clockwise to the ON
position. The tape pressure roller will hold the
tape securely with the drive roller.
Remove print tape slacking by manually turning
the print tape as in the right illustration.
Attach the print tape cover.
Roulette knob
Matte surface
Power switch
Warning
The heater section becomes
extremely hot in a few minutes after
turning ON the power. Be careful
not to burn yourself.