Van Der Stahl FEP-N2 Series, Руководство по эксплуатации

Страница: 22 / 38

FEP-N2 Series Operating Instructions Ver. 7.01E
FEP-N2
Essential tools: Transparent tape
See “ 12-2 Replacing print tape of FEP-OS-N2 and
FEP-V-N2 ” for how to replace the print tape of FEP-
OS-N2 and FEP-V-N2.
Replace parts according to the following directions in order to maintain your printer in optimum operating
condition.
Remove a print tape cover. Turn the power
switch to the OFF position. Print tape will be
loose by creating a space between the tape
pressure roller and drive roller.
5HSODFLQJWKHURXWLQHPDLQWHQDQFHSDUWV
5HSODFLQJSULQWWDSHRI)(31
110V
220V
Power switch
Warning
When replacing the print tape, turn OFF
the power switch and allow types and a
type cassette case to cool completely
before print tape replacement. There is a
danger of burning.
Warning
Warning
Warning
Always unplug power plug before replacing any parts. There is a danger of electrocution if
conducted with the plug still inserted. Make sure to cool the heater section unit before replacing
types or there is a danger of burning.
Do not replace parts according to other methods not described in the operating instructions. It is
dangerous if incorrect methods are used.
Always use only specified parts sold through Van der Stahl Scientific . Unspecified parts may cause
malfunction of the machine.
Always unplug sealer power plug
from the wall outlet before
conducting any maintenance.